How Many Questions Are on the OSHA 30 Final Exam?
The OSHA 30 final exam typically consists of 100 multiple-choice questions. However, the exact number of questions may vary slightly depending on the training provider or course format. For example, with Osha.com, the final exam consists of 20 questions.
The exam covers all the topics taught in the OSHA 30 training program and tests your knowledge of the information covered throughout the course. Participants are required to achieve a passing score to obtain an OSHA 30 certification, which is typically set at 70% or higher.
Keep in mind, you only get three opportunities to pass the final exam. If you do not pass it after the third try, you will be locked out of the course and cannot complete your outreach training in an online setting.
How Long Is the OSHA 30 Final Exam?
The OSHA 30 final exam completion time depends on the number of questions on the exam and how well you studied and attended class.
As mentioned earlier, participants are required to achieve a passing score to obtain an OSHA 30 certification, which is typically set at 70% or higher.
It's important to manage your time effectively during the exam and pace yourself so that you have enough time to read and answer all the questions.
Moreover, you have six months from your course enrollment date to complete the 30-hour OSHA Outreach Training. Once the six months pass, your account expires, and you will be required to purchase the course again.
OSHA 30 Practice Test
It’s time to put your knowledge to the test!
Below, you'll find a few OSHA 30 practice questions. Once you finish answering the questions, we'll discuss the correct OSHA 30 test answers in detail. Let's begin!
1. What is the minimum clearance distance between overhead power lines and a person?
A) 4 feet
B) 6 feet
C) 8 feet
D)10 feet
2. What is the maximum allowable weight that an employee can lift at one time without assistance or mechanical devices?
A) 20 pounds
B) 50 pounds
C) 75 pounds
D) 100 pounds
3. When should you inspect a scaffold?
A) Before each work shift
B) Before each use
C) After each use
D) After an accident occurs
4. Which of the following is an example of a biological hazard in the workplace?
A) Chemical spill
B) Heat stress
C) Mold exposure
D) Noise exposure
5. What is the minimum height for fall protection on a construction site?
A) 2 feet
B) 4 feet
C) 6 feet
D) 8 feet
6. Which of the following is an example of a hazard associated with excavation work?
A) Heat stress
B) Electrocution
C) Fall hazards
D) Noise exposure
7. What is the most effective way to control hazardous energy during maintenance or servicing of equipment?
A) Isolation of equipment from its energy source
B) Posting warning signs
C) Providing personal protective equipment (PPE)
D) Removing equipment from service
8. What is the purpose of lockout/tagout procedures?
A) To prevent workers from being exposed to hazardous energy
B) To prevent workers from using equipment improperly
C) To prevent workers from damaging equipment
D) To prevent workers from leaving equipment unattended
9. Which of the following is an example of a non-ionizing radiation hazard?
A) X-rays
B) Ultraviolet (UV) radiation
C) Gamma rays
D) Beta particles
10. What is the minimum distance that a forklift must maintain from an electrical power line?
A) 5 feet
B) 10 feet
C) 15 feet
D) 20 feet
OSHA 30 Answer Key
1. D) 10 feet
Explanation: OSHA requires that a minimum clearance distance of 10 feet be maintained between overhead power lines and any person or equipment unless specific engineering controls are put in place to protect workers.
2. B) 50 pounds
Explanation: OSHA recommends that the maximum allowable weight for manually lifting objects is 50 pounds. Anything heavier than that should be lifted using mechanical aids such as cranes, forklifts, or hoists.
3. B) Before each use
Explanation: Scaffolds should be inspected before each use to ensure that they are in safe working condition.
4. C) Mold exposure
Explanation: Biological hazards in the workplace include exposure to mold, bacteria, viruses, and other microorganisms.
5. C) 6 feet
Explanation: Fall protection is required on a construction site when working at a height of 6 feet or more.
6. C) Fall hazards
Explanation: Excavation work presents a risk of cave-ins, which can lead to falls and other injuries. Proper shoring and trenching techniques should be used to prevent cave-ins and other hazards associated with excavation work.
7. A) Isolation of equipment from its energy source
Explanation: The most effective way to control hazardous energy during maintenance or servicing of equipment is to isolate the equipment from its energy source through lockout/tagout procedures.
8. A) To prevent workers from being exposed to hazardous energy
Explanation: Lockout/tagout procedures are used to prevent workers from being exposed to hazardous energy, such as electrical, hydraulic, or pneumatic energy while servicing or maintaining equipment.
9. B) Ultraviolet (UV) radiation
Explanation: Non-ionizing radiation hazards include UV radiation, infrared radiation, and microwave radiation, among others. Ionizing radiation hazards include X-rays, gamma rays, and beta particles.
10. B) 10 feet
Explanation: A forklift must maintain a minimum distance of 10 feet from an electrical power line.
Do you need OSHA 30 training? As an OSHA-Authorized Outreach training online provider, we offer OSHA 30 courses for both the Construction and the General Industry. Gain the knowledge and skills you need to get OSHA certified!