Login Sign Up
Mock Tests > CPCS 360 Excavator Mock Test
There are 20 questions and and answers in this CPCS 360 excavator mock test. You need to score a minimum of 16 out of 20 to pass. You have 60 minutes to complete the test. Good luck!
Tests Taken
Last Score
Average Score
Your Progress
1796 votes - average 4.7 out of 5
Next Test >>
<< Previous Test
CPCS 360 Excavator Mock Test Quick View
Click the question box to reveal the correct answer. You can print the CPCS 360 Excavator Mock Test questions and answers by clicking the printer icon below.
1. You are using a multi-leg chain sling - in which TWO of the following configurations will the equipment's safe working load apply?Give TWO answers
A When the legs are at 60 degrees to each other
B When the legs are at 90 degrees to each other
C When the legs are of equal length
D When the legs are of unequal length
Correct Answer: B When the legs are at 90 degrees to each other, C When the legs are of equal length
Explanation: The safe working load of a multi-leg chain sling only applies if the legs are of equal length, or form a 90 degree angle.
2. A CAT (cable avoidance tool) can be used to check for most underground services before excavation begins. Which of the following materials, however, is it likely to miss?Give ONE answer
A Copper
B Lead
C Plastic
D Steel
Correct Answer: C Plastic
Explanation: CATs are limited in their ability to detect plastic.
3. You are placing spoil alongside a trench that is 1.5m deep. How much space must you leave between the vehicle and the edge of the trench?Give ONE answer
A 1.5m
B 1m
C 2m
D 3m
Correct Answer: A 1.5m
Explanation: You must keep a distance between the vehicle and the trench that is at least equal to the depth of the trench. This is to reduce the risk of trench collapse.
4. You are about to start using a semi-automatic quick-hitch bucket attaching system. What must you check before you start?Give ONE answer
A If the correct insurance has been acquired
B If the safety pin has been removed and isolated
C If the safety pin is correctly positioned and locked
D If the safety pin is correctly positioned and unlocked
Correct Answer: C If the safety pin is correctly positioned and locked
Explanation: The safety pin must be locked and correctly positioned.
5. If you fail to comply with regulations and legislation, you may be prosecuted. Which TWO of the following are possible outcomes of this prosecution?Give TWO answers
A You are found guilty, and may be imprisoned or ordered to pay a fine
B You are found guilty, but are unlikely to face serious consequences such as imprisonment or a fine
C You are likely to be found not guilty even if your actions were proven to violate regulations - your employer is the one who will be held responsible
D You are likely to be found not guilty, if you can prove that you fulfilled all relevant legal requirements
Correct Answer: A You are found guilty, and may be imprisoned or ordered to pay a fine, D You are likely to be found not guilty, if you can prove that you fulfilled all relevant legal requirements
Explanation: If you are found to have violated regulations and legislation, you will face serious consequences such as fines or imprisonment.
6. You are attaching an accessory to a quick-hitch coupler. How should the coupler and ram be positioned?Give TWO answers
A Coupler tilted downwards
B Coupler tilted upwards
C Ram contracted
D Ram extended
Correct Answer: A Coupler tilted downwards, D Ram extended
Explanation: Tilting the coupler downwards, with the ram extended, will make re-attachment easier and reduce the chance of unintended pivots.
7. You are carrying out a lifting operation over the excavator's side, rather than its front. How will this affect the vehicle's centre of gravity?Give ONE answer
A It will shift closer to the centre of the machine's footprint
B It will shift to the front edge of the machine's footprint
C It will shift to the outer edge of the machine's footprint
D It will shift to the rear of the machine's footprint
Correct Answer: C It will shift to the outer edge of the machine's footprint
Explanation: Lifting over the side will shift the vehicle's centre of gravity in that direction. This will affect the vehicle's centre of gravity.
8. What is the principal role of an RCI or an LMI?Give ONE answer
A To warn nearby pedestrians
B To warn when the rated capacity has been exceeded
C To warn when the vehicle is becoming unstable
D To warn when underground cables are nearby
Correct Answer: B To warn when the rated capacity has been exceeded
Explanation: A rated capacity indicator (RCI) or a load moment indicator (LMI) serve mainly to warn the operator when the rated capacity has been exceeded.
9. Which TWO of the following together describe the danger zone created during a lifting operation?Give TWO answers
A The area 3m around the vehicle
B The area above or below the load
C The area within the machine's radius
D The operator's cab
Correct Answer: B The area above or below the load, C The area within the machine's radius
Explanation: The danger zone during lifting operations is the area within the vehicle's radius that falls both above and below the load.
10. What is a risk assessment for?Give ONE answer
A Establishing what kind of medical support is required on site
B Identifying and eliminating all hazards
C Identifying hazards and introducing suitable control measures
D Identifying hazards to be entered into insurance documentation
Correct Answer: C Identifying hazards and introducing suitable control measures
Explanation: Risk assessments are used to identify hazards and decide how to control them.
11. What is a lift plan for?Give ONE answer
A To ensure that all hazards have been identified and mitigating measures are put in place
B To ensure that all relevant parties understand how to safely move the load
C To ensure that the operation will be carried out as quickly as possible
D To ensure that the project management team can defend itself if prosecuted
Correct Answer: B To ensure that all relevant parties understand how to safely move the load
Explanation: A lift plan is put in place to ensure all relevant parties know how to safely carry out a lifting operation.
12. You have just finished loading the excavator onto a trailer so a driver can transport it to a different site. Which of the following must you ensure?Give THREE answers
A That hydraulic components are grounded with the pressure removed
B That the engine is off
C That the parking brake is off
D That the windows are shut
Correct Answer: A That hydraulic components are grounded with the pressure removed, B That the engine is off, D That the windows are shut
Explanation: These are all checks that must be carried out - but the parking brake must be on.
13. You will be carrying out excavation in a confined space. Which TWO of the following are important to consider before you begin?Give TWO answers
A Are you in close proximity to hazards?
B Do you have the correct medical insurance?
C Have you received the correct vaccinations?
D Where will you put the spoil?
Correct Answer: A Are you in close proximity to hazards?, D Where will you put the spoil?
Explanation: Confined spaces present various obstacles that you must consider - among them are that you may be in close proximity to hazards, and will need to determine in advance where to place spoil.
14. Which of the following is NOT something that may cause an excavator to tip?Give ONE answer
A The ground is soft
B The load is unevenly distributed
C The machine is low on fuel
D The tyres (if the excavator has wheels) are soft
Correct Answer: C The machine is low on fuel
Explanation: Low fuel levels will not cause a machine to tip, but these other factors might - as well as operating the machine on a slope or when it is heavily loaded.
15. You are using a lifting accessory so you can lift a slung load. When attaching the accessory to the quick-hitch coupler, which TWO of the following checks must you run?Give TWO answers
A Are the attachments the correct size and weight?
B Is any damage to the attachment minor enough that work can continue?
C Is the locking system correctly engaged?
D Will the attachment slow down the pace of work?
Correct Answer: A Are the attachments the correct size and weight?, C Is the locking system correctly engaged?
Explanation: You must ensure that the attachments are suitable for the lifting operation, and that the locking system is engaged. You must not continue working if the equipment is damaged - and working slowly is necessary if it means work will be safe.
16. You will be lowering a drag box into a trench. Which of the following checks MUST you carry out first?Give ONE answer
A Have you installed an audible alarm?
B Is the bottom of the trench correctly soaked?
C Is the trench clear of personnel?
D Is the trench clear of supports?
Correct Answer: C Is the trench clear of personnel?
Explanation: You must always check that the trench is clear of personnel before moving a drag box in.
17. Why is it important to isolate the controls before the slinger disconnects or attaches a load?Give ONE answer
A The controls may be accidentally operated, causing injury
B The mechanism will not work until controls have been isolated
C The movement may cause the controls to overheat
D The vehicle may be accessed by unauthorised persons
Correct Answer: A The controls may be accidentally operated, causing injury
Explanation: It is important to protect the slinger from injury - which can occur if the controls are accidentally operated.
18. Work at Height Regulations apply in many activities one might not expect them to - operating a 360 excavator is one of them. Which TWO of the following may require operators to follow work at height regulations?Give TWO answers
A Accessing the cab
B Cleaning the tyres
C Maintaining the boom
D Refuelling
Correct Answer: A Accessing the cab, C Maintaining the boom
Explanation: Cab access and boom maintenance may both require operators to follow work at height regulations.
19. True or false: failure to comply with legislation or regulations may result in a prison sentence?Give ONE answer
A False
B True
Correct Answer: B True
Explanation: Operators who do not comply with the law, or with regulations, may have prison sentences handed down by judicial bodies.
20. Overhead electricity lines are a major electrocution hazard for plant and machinery. For this reason, strict minimum distance requirements must be calculated. Which TWO of the following are used to calculate the minimum distance requirement?Give TWO answers
A The electrical voltage in the line
B The experience of the operator
C The height of the vehicle
D The pylon material
Correct Answer: A The electrical voltage in the line, D The pylon material
Explanation: Minimum distances are calculated by considering the voltage running through the lines, and the hazard created by the pylon itself - wooden pylons and metal pylons will require different minimum distances.